Weaving machine accessories manufacturer: Weaving machines can be classified into two categories based on the insertion method of weft yarns woven, namely shuttle looms and shuttle less looms. At present, most weaving machines with shuttles have been replaced by weaving machines without shuttles. There are various ways to insert weft yarns in shuttle less looms. Rapier, spray (jet, jet), shuttle, more or less (multiphase), knitting, etc.

　　1. Rapier loom

Weaving machine accessories manufacturer: The rapier loom uses a hard or flexible rapier head to guide the weft yarn into the fixture. The rapier loom is not only suitable for weaving plain and textured fabrics, but also convenient for color weaving. Multi colored weft fabrics are suitable for the production of color woven, double pile fabrics, loop fabrics, and decorative fabrics.

2. Jet loom

Weaving machine accessories manufacturer: Jet looms use compressed air flow to pull the weft yarn, preventing it from being too tight. The main characteristics of jet looms are their fast speed, high labor productivity, and suitability for the production of plain and textured, fine high-density fabrics, and large quantities of fabrics.

3. Water jet loom

Weaving machine accessories manufacturer: The water jet loom uses water as the weft medium to generate frictional traction on the weft through the jet flow, and introduces the fixed and commercial weft into the anti fouling process. Water jet looms are mainly used in the production of hydrophobic filament synthetic fabrics with smooth surfaces due to their high speed and high unit output.

4. Shuttle loom

Weaving machine accessories manufacturer: Shuttle looms use small flaps with pliers to grip and project weft yarn. The shuttle loom has the advantages of stable weft yarn, fabric quality, and reduced weft yarn, and is suitable for the production of multi-color weft fabrics, tight, thick fabrics, and wide fabrics.

There are various types of shuttleless looms, and personnel need to use different weaving equipment and processes according to the textile raw materials during operation, which helps to improve the quality of textiles.

Weaving Machine Accessories Manufacturer: Order of Weaving Machines

1. Open

An open mechanism generally consists of a comprehensive device, a comprehensive device, and a control device that controls the ascending order of the comprehensive framework (silk). The components of the weaving machine in different parts are also different. Generally speaking, the first half of the shuttle is very small and cannot be changed, and the tension of the flying wire mainly depends on the second half of the shuttle.

2. Insert Guard

Introducing weft yarn, as the name suggests, is the process of introducing weft yarn into the mouth, causing the warp and weft to cross and form a fabric. The insertion of weft yarn is mainly carried out through the weaving machine components shuttle, which is an important link for weft yarn to form fabrics.

3. Latitude

During weft beating, the loom relies on the weaving machine components steel for reciprocating motion, changing the spinning process.

4. Coil ring

The process of winding is the process of winding the wire around the winding roller.

5. Delivery

Continuously emit an appropriate amount of warp yarn towards the straight axis.

Weaving Machine Accessories Manufacturer: There are thousands of weaving machine accessories on the weaving machine, and only these weaving machine accessories work together to ensure the smooth operation of the entire weaving machine. Only by starting a stable weaving machine can the textile work run smoothly.

The above article is an introduction to the manufacturer of weaving machine accessories. Let's refer to it for everyone.