Weaving is a traditional craft with thousands of years of history. In the past, those complex and massive looms could only be appreciated in museums.

　　Briefly describe the accessories of the weaving machine

The weaving machine is composed of various sizes of weaving machine accessories. How do we understand the components of a loom from its composition? Before introducing the accessories, we need to understand the composition of the entire loom. The loom has five components in total: opening mechanism (cam linkage opening, multi arm opening, jacquard opening), weft insertion mechanism (shuttle loom, shuttle less loom), weft beating mechanism (linkage opening) type, conjugate cam type), winding mechanism (positive pressure connection), and warp release mechanism (mechanical adjustment).

1. Opening

The opening mechanism is generally composed of a lifting device, a return device, and a control device for the lifting sequence of the heald frame (heald), and the accessories of the weaving machine are also different in different parts. Generally speaking, the first half of the shed is small and cannot be changed, and the warp tension mainly depends on the second half of the shed.

2. weft insertion

Weft insertion, as the name suggests, is the process of introducing weft yarn into the mouth, interweaving warp and weft to form a fabric. The weft insertion is mainly completed through the shedding of weaving machine accessories, which is an important link in the formation of weft yarn into the fabric.

3. Beating

During the beating process, the reciprocating motion between the loom and the reed as an accessory to the loom changes the spinning process.

4. Coil

The winding process is the process of winding the spinning yarn onto the fabric roller.

5. Sending out

The corresponding degree of warp is continuously released from the weaving shaft.

Weaving machine accessories manufacturer: Currently, the gun foot core shaft, shuttle rod foot cap, and shuttle rod of the weaving machine shuttle device are generally fixed together through simple screw connections. After a period of normal operation of the weaving machine, the connection between the gun foot core shaft and the shuttle rod foot cap is prone to wear and loosening, and the torque spring also generally has unreasonable structural defects such as the cross gun foot shaft sleeve, which is prone to wear and tear.

Weaving Machine Accessories Manufacturer: There are thousands of weaving machine accessories on the loom, and only when these accessories work together can the smooth operation of the entire loom be guaranteed. With a stable loom, textile work can proceed smoothly.

Weaving machine accessories manufacturer: A weaving shuttle device, involving weaving machine accessories, especially improvements to the components of the weaving shuttle device. It includes a cross gun foot (1), a gun foot spindle (2), a torsion spring (3), a torsion spring adjustment clamp (4), a hook rod (5), and a hook rod cap (6). The front end face of the spindle (2) is equipped with a fan-shaped clamp block (7), and the front end face of the spindle (2) is equipped with bolt holes (8) along the axis. The bolt through-hole (9) connected to the shaft (2) is equipped with a fan-shaped card slot (10) corresponding to the card block (7). The gun foot spindle (2), hook cap (6), and hook (5) are connected to the hook cap (6) and fixed together through bolts and bolt holes (8). It has the advantages of reasonable structure and tight connection, which can greatly extend the service life of the shuttle device and shorten the equipment maintenance cycle.